Manufactur standard Heat Pump Condensation Outside - Condensate Atomization Pump – Wipcool

Short Description:


Product Detail

Documents

Video

Product Tags

Related Video

Feedback (2)

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Condensate Tank Pump , Automotive Pressure Coil Washer , Microdam Condensate Pump , Our items have exported to North America, Europe, Japan, Korea, Australia, New Zealand, Russia and other countries. On the lookout ahead to make up a good and long-lasting cooperation with you in coming potential!
Manufactur standard Heat Pump Condensation Outside - Condensate Atomization Pump – Wipcool Detail:

147

As we all know, condensate is an appendage produced in the refrigeration process of air conditioning, which is caused by the condensation of moisture in the air on the evaporator of air conditioning. Most of the condensed water is conveyed to the sewer by the drainage pipe designed in advance. However, a large part of condensate will be directly discharged to the outside,causing environmental pollution.

P15 condensate atomization pump is specially designed to solve the problem of condensate discharge. The condensed water generated in the refrigeration process is turned into water mist, which is sprayed around the condenser of the external unit of the air conditioner to reduce the temperature, significantly improve the heat exchange efficiency of the air conditioner, and is of great significance to the energy saving of the air conditioner. At the same time, it also solves the problems of complicated condensate drainage pipe layout and environmental pollution caused by condensate water. We will truly turn waste into treasure, save energy and reduce emissions, and achieve carbon neutrality.

Technical Data :
Model: P15J
Voltage: 230V~/50-60Hz or 100-120V~/50-60Hz
Flow Rate(Max.): 15L/h(2 nozzles)
Pressure: 7bar
Suction lift 1.5m(5ft)
Tank Capacity: 35ml
Mini Splits up to: 30,000btu/hr
Sound Level at 1m: 55dB(A)
Power: 35W
Ambient Temp: 0℃-50℃

Product detail pictures:

Manufactur standard Heat Pump Condensation Outside - Condensate Atomization Pump – Wipcool detail pictures

Manufactur standard Heat Pump Condensation Outside - Condensate Atomization Pump – Wipcool detail pictures

Manufactur standard Heat Pump Condensation Outside - Condensate Atomization Pump – Wipcool detail pictures


Related Product Guide:

Gaining client pleasure is our company's aim without end. We are going to make excellent efforts to create new and top-quality goods, meet your special requirements and provide you with pre-sale, on-sale and after-sale companies for Manufactur standard Heat Pump Condensation Outside - Condensate Atomization Pump – Wipcool , The product will supply to all over the world, such as: Luxemburg, Sheffield, Armenia, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
  • Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By Eve from Estonia - 2017.10.23 10:29
    The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Dolores from New Zealand - 2017.10.27 12:12
    Write your message here and send it to us